SPACING THE FENCE POSTS



■As a rule, you should set fence posts about 6' to 8' apart. The spacing of the posts depends on the type of fence you build, the terrain, the purpose of the fence and other such factors.


■Set the corner or end post first. Then stretch a line from each corner or end post to align all the posts in between.


■Drive a stake every 6' to 8' at the exact position where the post hole is to be dug.


■Take time to measure and position the posts accurately. The appearance and the structural strength of your fence depends a great deal on the positioning of the fence posts.









--------------------------------------------------------------------------------


SETTING THE FENCE POSTS



■Set all wood fence posts with about 1/3 of their total length buried in the ground. This is especially important on corner posts and any posts that will carry heavy weight or withstand high wind pressure.


■Use a regular post hole digger to dig the post holes. Dig the holes straight to the proper depth at each stake marker.


■You can anchor the posts more firmly by making the holes slightly larger at the bottom than at the top. Place a large stone or two shovels full of gravel in the bottom of each hole. This provides drainage to avoid excessive moisture at the base of each post.


■Use a wood preservative to treat the section of the post that will be underground. Allow the post to stand overnight in the preservative so it can become well-saturated.


■You can pack the posts with either dirt or concrete. In either case, place two or three shovels full of gravel in the bottom of each hole before the post is placed into position.


■Be sure the posts are in an exact, upright position. You can check the alignment of each post with a regular level. You can also check the alignment of the posts in one direction by sighting from one end of the row of posts to the other.


■Brace each post with stakes after it is properly aligned. Keep the stakes in position until the concrete (if used) has thoroughly set. Remove the nails holding the braces and readjust the post until it is in accurate alignment.


■When the post is properly aligned, tamp it thoroughly to pack the dirt (if used) around the base of the post. Be sure you do not alter the alignment of the post during the tamping process.


■When the post is firmly in position, build a mound around it to help eliminate water standing at the post base. Slope the concrete slightly away from the post and round it off with a trowel. Tamp the concrete lightly to eliminate any air bubbles left in the mixture that can act as water pockets.


■Provide extra bracing at all corners. A corner post must carry the weight of fence stretched in two directions, so it should be set in both directions.


■Allow the posts to stand several days and settle firmly in position before adding the fence.


■The heads of posts should be rounded, capped or slanted to help eliminate accumulating water, which can cause rotting. This is well-worth the effort since it allows the posts to last.























--------------------------------------------------------------------------------


ADDING RAILS TO FENCE POSTS



■Attach a top and bottom rail to the fence posts. There are three basic ways to do this.


■The center illustration shows the top rail being nailed to the top of the post. This is an ideal installation for many types of fencing structures. The top rail can always be joined to another rail in the center of a post this way.


■If the rail is added on the body of the post rather than at the top, attach it with a groove, a wood block or a metal bracket.


■You can attach the bottom rail to the post by either of the two outside illustrations.


■Fig. 8 illustrates several other ways to attach a rail to a fence post. Study these illustrations carefully. The type of joint you use to attach the fence supports to the post depends primarily on the type of fence you are building.


■The lap joint is one of the easiest to use. The grooved joint does basically the same job, but the rail is grooved into the post rather than being nailed to the post surface.


■The butt joint is a little more difficult to make but is often better. The mortised joint is even neater than the butt joint, but you must cut a mortise into the post for this joint.


■The slotted joint is commonly used on decorative fences. Treat all slotted joints with preservative to prevent rotting in the grooved areas.


■Take time to measure from the top rail to be sure the bottom rail on each is in perfect alignment. After you have measured one post, cut a measuring stick to prevent having to make an actual measurement on each post. The stick can be used to apply the same measurement to each post.



















--------------------------------------------------------------------------------


SELECTING THE FENCE STYLE



■There are literally hundreds of variations in fence styles and construction materials. There is pre-assembled wood fencing sections as well as fencing materials made from recycled milk jugs. The type of fence you use depends primarily on the purpose.


■Fences like the type shown in are used primarily for barriers. They are easy to build and provide an adequate barrier. However, they are usually not very decorative and they provide very little, if any, privacy.


■Fences like those illustrated provide barriers and are more attractive than an ordinary fence. With a little shrubbery or plants, such fences can provide very attractive barriers along property lines.


■Fences such as those illustrated are primarily privacy screens. They can be built as tall as needed out of many different materials. Their primary purpose is privacy.


■Consider your needs when selecting the style of your fence. If you want a simple barrier, a wire fence or a simple style fence such as illustrated will work fine.


■For a barrier that enhances the appearance, consider styles similar to those illustrated.


■For added privacy, consider the styles illustrated.


■Regardless of the type of fence you plan to build, be sure you know exactly where your property line is located. If you are uncertain about the location of the line, check into it or work out an agreement on the fence location with your neighbor.


■Also, check any local ordinances applying to fences before beginning construction. Call the building department of your local city hall or ask for the local government office that regulates construction to be sure you abide by city codes.


■Try to keep the bottom rail of any fence at least 2" above the ground. This helps eliminate the problem of decay and makes it easier to trim grass around the base of the fence.


■Four basic styles of easy-to-build fence. Each style has the same basic top, center and bottom rail construction. However, the fences look entirely different with the various rail treatments.


■Study the designs carefully. Decide which of these styles you prefer, or use a little imagination and create your own fencing design to apply to the basic rail fencing structure.


■Picket fences are very popular and easy to build. With a little ingenuity you can create attractive picket designs. Study the designs. Use the designs shown or your own designs to create a distinctive picket fence.


■Make sure that all the pickets are spaced by inserting a loose picket between the picket previously nailed into position and the picket to be nailed. Use this easy method throughout the entire fencing construction.


■A basket weave fence is often used on a sloping terrain. This style of fence allows you to raise or lower each post.


■Use a good-quality board to build a basket weave fence. Boards full of knots may break easily when placed under the stress of basket weaving.


■A simple board fence is easy to build and can be quite attractive. You can place the boards on one side or alternate them from side to side.


■The board fence provides both a barrier and privacy. It can be built as tall as needed and then stained, painted or left natural.


■You can design a siding fence to match the siding on your home of this style. In fact, you can use the same siding that was used on the home to build the fence.


■The siding fence can be covered on one side or both. Then, you can paint it to match or harmonize with the paint on your home.


■These are only a few of the many styles of fencing available. Fences are easy to build, and the materials are readily available.



































--------------------------------------------------------------------------------




TOOL AND MATERIAL CHECKLIST



■Boards & Posts
■Post Hole Digger
■Steel Tape
■Small Axe or Hatchet
■Nails
■Hammer
■Level
■Wood Chisel
■Wood Preservative
■Power Saw
■Paint or Outdoor Stain
■Marking Pencil
■Gravel or Sand
■Hand Saw
■Work Gloves
■Ready-Mix Concrete
■Tamping Rod

do it yourself, wood working blueprints if you can think it they will have it. these site are the best on the market today and they everything from tool list ,matierals and much more

You need extra storage. Badly. Your garage is overflowing and every unused corner of your house is full of things that have no business being stored indoors - unless, of course, you routinely like to ride your bicycle around the guest room for exercise. But you've resisted getting an outdoor storage building because you're afraid of ruining the appearance of your yard. Well, it's high time you conquered that fear

Do you need to know how to build a shed? Are you thinking about doing it yourself? If the answer is yes, then you will need some information.

How to Build a Shed – Picking Your Location
You have to first select a location of your shed in how to build a shed. Measure the area and figure out what size of building you can plan for. Also this area needs to be level or able to be made level. All the grass might need to be cleared to have the location completely level. Do all the work on getting this area ready before you ever start to build the shed.

Plans

The first thing with how to build a shed on your own is that you will need a good set of shed plans (I recommend My Shed Plans). These should not only tell you the measurements of all the parts, but should also give you a materials and tools list of things needed to complete the project. The list should tell you what type of wood to use too, like pressure treated or cedar. This way you will not have to stop in the middle to run to the store.

Get Ready

After buying all your materials and making sure you have the tools that are needed, have them in the area where you will be building the shed. This will make it more convenient for the construction process. Now take you wood that is part of the materials and cut it all to the sizes needed. The part of how to build a shed is for your convenience.

Building

Once all your wooden boards are cut to size it is time to start assembling them. First build the foundation. Measure it diagonally corner to corner both ways to make sure it is square. This is a very important step, if the foundation is not square, your whole shed will be built crooked, and this could make the doors not fit in the end. This is all part of how to build a shed.

After the foundation comes the floor. Again check the dimensions to see if they are square. Now it is time for the walls. The walls are easily built laying flat. Check them to see if they are square just like the foundation. Then have someone help you raise them into place and secure them. Whether you are using a nail gun or wood screws by hand, secure the walls firmly. One of the walls will have the door opening in it make sure this one goes on the front side. Once all four walls are up make sure the top is square just like in other steps of how to build a shed.

How to Build a Shed – Building Your New Roof
Now it is time to build the roof. Once this is done you can build and install the doors and windows (if windows were included in the plan). Now for the finishing touches. Just like with a house’s roof tiles are good to put on the shed. This will protect the wood and make it last longer. It is important to do this according to how to build a shed.

Stain or paint the outside of the shed. You can even put siding on it, if you so choose, so it looks like your house. Once the paint or stain is dry your shed is ready for use. This is how to build a shed.

If you’re looking for the best shed plans available online, I highly recommend checking out My Shed Plans. And you visit their official website today you can get instant access to 12,000 FREE Shed plans!

If you want to read more about all the reasons you should consider building a shed, visit my other articles on the site!

Tagged as: build your own shed, building a shed, garden shed plans, how to build a shed, storage shed plans, wood shed plans

{ 0 comments }

Build Your Own Shed and Save Money
Do you have junk all over you yard? Maybe your problem is the kids’ toys they play with outdoors? Then it sounds like you need a storage shed. Oh you do, but there is not much money in the budget right now? Then you need to build your own shed and save money.

Build Your Own Shed and Save Money
You can knock off several thousands of dollars when you build your own shed over the premade ones. If making things comes easy for you this is a good project for you. Grab a set a plans and start figuring out the rest, is all you have to do.

How many windows is this shed going to have? If you are using it for more than just storage you will want one or two at least. This will let the natural sunlight in and help to warm it in the cold months. Now if it strictly for storage you might opt out on having any windows. Also if you are worried about it being less secure with them leave them off. No one needs to see in your shed after all. When you build your own shed it is easy to custom design it.

Do you want a single large door or a double door? This is another important decision when you build your own shed. The doors are hung differently in some cases and will need specific hardware. If you are going to be keeping your riding mower in the shed, then it might just need the double doors so you have enough room to drive the mower in and out.

Do you want overhead storage? There are certain models that are better for this than others. The barn style is one example. The roof on it allows for more room at the top. When you build your own shed this is one of the styles of plans to look at to sit it if it fits your needs.

Build Your Own Shed – Which Design is Right for You
There are other design types to choose from like the gable and saltbox. Each design has its own characteristics; there is no one design that is better than the others. It is all up to you and what the needs for the shed are. So compare the different styles and see what each has to offer you.

Another consideration when you build your own shed is a ramp. Do you need a ramp to drive your riding mower into the shed? Some garden shed plans will include this in the blueprints. This of course depends on where the shed is going to be located. If it is going to be right off of the driveway no ramp may be needed.

With this information above doesn’t it sound plausible to build your own shed? Remember that by doing the work yourself a lot of money will be saved. After the shed is built you can get your yard and house more organized, which will make both more comfortable to live with. So build your own shed today.

A shed is a small enclosed area built in the backyard. It is usually made of wood. A shed is mostly used to shelter delicate plants from severe weather, keeping worn out furniture or as a place to relax or even to work. You can build a shed from a large variety of materials available on the market. Here are some guidelines to build a shed.

Difficulty:Moderately EasyInstructions


1
Determine the purpose for which the shed will be used.

2
Plan the shed size to suit it's purpose.

3
Prepare a list of materials that you will need. This will include wooden panels, metal frames and sheets, molded plastic frames, hammer, nails and adhesives (see link below).

4
Look for an appropriate site that remains clean and dry. It should not have water-logging problems.

5
Decide on the type of flooring; concrete or wooden.

6
Clear the chosen location of debris, grass or plants. Level it well.

7
Start making the shed frame. Use a hammer and nails to join wooden boards. Use molded plastic frames if needed.

8
Make windows and door as per your plan. Cut the frames according the size you want.

9
Erect the frames with the correct sizes and nail them well.

10
Ensure that all the four walls and windows are linked strongly with the nails and adhesives.

11
Keep at least one source of light if you want to use the shed at night. Call an electrician, if necessary.

12
Paint and furnish the shed as desired.